MODEL #PG/101-2

THE NEW IMPROVED SENIOR FLOOR STRIPPER TAKES IT ALL OFF

Removes almost any accumulation from concrete or wood floors and leaves surface smooth and ready for refinishing.

• IMPROVED WEIGHT RETAINING SYSTEM
• IMPROVED/MODIFIED BASE
• IMPROVED FRONT END ASSEMBLY
• MODIFIED BELT-GUARD
• IMPROVED BLADE CLAMP SYSTEM

A single, razor-sharp blade that oscillates 2000 strokes per minute quickly and safely removes virtually any kind of floor covering.

This stripper is easy to operate, and can be mastered by a beginner in just minutes. Simply plug it in and turn it on. No strenuous effort is required. "The Stripper does the work." Just raise the wheels slightly off the floor. No hard pushing. The action created by the machine goes to the blade on the floor, not to you!

QUIETER!
LESS MAINTENANCE!
EASIER SERVICING
LONGER LASTING PARTS!

There is a CONDITIONAL 10year WARRANT, to the original owner, on all mechanical parts of the Front End Assembly (PG 60-1) which is the 'heart" of the Senior Floor Stripper.

Our newest improvement to the senior floor stripper is the 54PG improved blade safety assembly kit- the 54PG becomes a permanent part of the No. 11PG striker foot casting. giving you the safest method of blade changing ever designed. Only 2 nuts to tighten - completely away from the blade. No more guesswork - correct blade placement every time with built-in stop bar. (PATENTED)

MODEL #464

Fast!
In field tests, the #464 removed Collins & Aikman Power Bond glued down carpet at the rate of more than 13 lineal feet per minute (10" wide strips).

Versatile!
Removes direct glued down carpet, resilient sheet goods, vinyl tile and other difficult floor accumulations.

Economical!
The #464 Self-Propelled Stripper is far less expensive than other self-propelled strippers.

Efficient!
Gets down to and through adhesive.

Reliable! Durable! Quiet!

The #464 Self-Propelled Stripper comes with a one year warranty. Complete with grease gun, wrench and blade package consisting of 2 - 4" x 6", 1 - 5" x 6", and 2 - 3" x 10" blades.

MODEL #460-D

SENIOR FLOOR STRIPPER

Number one in floor stripping machines for more than 25 years. A single razor-sharp blade that oscillates 2000 strokes per minute quickly and safely removes virtually any kind of floor covering or accumulation from concrete or wood floors and leaves surface smooth and ready for refinishing. (Removes asphalt tile, linoleum, rubber tile, cork, epoxy glue, vinyl asbestos tile, grease, indoor/outdoor felt, chewing gum, plaster leavings, ice, rubber backed carpet, tennis court surfaces, etc.)

This stripper is easy to operate and can be mastered by a beginner in just minutes. Simply plug it in and turn it on. No strenuous effort is required. "The Stripper does the work." Just raise the wheels slightly off the floor and it will move along by itself. No hard pushing. The action created by the machine goes to the blade on the floor, not to you.

BRONCO

Low pressure hydraulic system operates at 500-700 psi nominal. This low pressure system has many benefits over conventional high pressure systems that operate at 3,000 + psi.

Rear Adjustable Suspension

• Able to run over debris without disengagement of the blade with floor material being removed.
• You keep going while the others are backing up and starting over. That is one of the reasons why the removal rate are so incredible.
• Suspension is adjustable for operator weight and blade condition.

Specifications:

• Length: 48"
• Width: 29"
• Height to top of seat: 44"
• Gross weight: 1185 lbs.
• Net weight without weights: 688 lbs.
• Motor: 7-1/2 hp, 220 volts, single phase, rpm 3450
• Tire Specification: 10.5"x6"x5" Super Solid non-marking
• Top speed: 550 feet per minute